Setting Up Discovery And Device Management; Device Management Quick Reference - Cisco CiscoWorks WLSE 1130-19 Installation And Configuration Manual

5
C H A P T E R
Setting Up Discovery and Device
Management
After setting up devices, you can discover and manage them. This section
describes discovery and management configuration for WLSE 2.11. The
procedures in this chapter apply to both the CiscoWorks 1130 and
CiscoWorks 1130-19 WLSEs.

Device Management Quick Reference

Table 5-1 on page 5-2 provides a high-level overview of the tasks for discovering
and managing devices. Detailed procedures are provided in this chapter.
For IOS access points used within a Cisco Structured Wireless-Aware Network
Note
(SWAN), you can use Wireless Doman Services (WDS) and the WLSE's
Deployment Wizard for device configuration and deployment, instead of
performing Tasks 1 through 4 in Table 5-1. The Deployment Wizard is the
prefered method for such deployments. The Deployment Wizard displays
immediately after you log in to the WLSE's web interface. For more information
on the Deployment Wizard, see the WLSE online help and the User Guide for the
CiscoWorks Wireless LAN Solution Engine, 2.11 on Cisco.com at
http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cwparent/cw_1105/w
lse/2_11/index.htm.
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
5-1
78-16778-01