Initial Setup Quick Reference - Cisco CiscoWorks WLSE 1130-19 Installation And Configuration Manual

Initial Setup Quick Reference

Table 3-1 Initial Setup Quick Reference
Task
Run the setup program.
1.
Configure DNS, if necessary.
2.
3. Verify the configuration.
Configure the web browser.
4.
Log in and verify connectivity.
5.
Add additional users.
6.
78-16778-01
Setting Up the WLSE
This chapter describes how to run the setup program and perform basic
configuration for WLSE 2.11 software. The instructions in this chapter apply to
both the CiscoWorks 1130 and CiscoWorks 1130-19 WLSEs.
Table 3-1 provides a high-level overview of the basic initial setup of the WLSE.
References
Configuring the WLSE's Network Information, page 3-2
Configuring Name Resolution, page 3-6
Verifying the Configuration, page 3-7
Configuring the Web Browser, page 3-8
Logging into the Web Interface and Verifying Connectivity,
page 3-12
Adding Users, page 3-13
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
C H A P T E R
3
3-1