FireplaceXtrordinair CoolSmart TV Manual page 6

4. Remove the left, top layer, cover plate. Turn it over and then reinstall it in place of the right cover
plate removed in step 1. Replace all screws so there are no holes left in the top of the fireplace.
NOTE: Removal of the left cover plate will expose two 5" holes in the top surface of the fireplace.
5. Use snips or diagonal cutters to snip the tab on the 2 knockouts located on the cover plate (relocated
to the right side in the previous step). Press on the far side away from the tap to pop the edge of the
knockout up. Grab on to the knockout with pliers and bend it back and forth until the remaining tabs
break free. Repeat this step with the second knockout on the cover plate. Discard the knockouts.
Page 6 of 33
CoolSmart TV
864, PB 42 Linear, PB 42 CF, 4415 HO
Sku# 98900779
17602029- 9/24/19 © Travis Industries, Inc.