Table of Contents
Advertisement
WARNING: In order to extract the heat properly from around the firebox, you will must remove (4) layers of cover
plates for each of the (4) flex attachment points on the top of the fireplace. Not removing all of the
cover plates can create hazardous conditions.
First Layer
Remove all (4) of the 5" knockouts (leave the square cover plates in place). Use snips or diagonal cutters to
snip the tab on the knockouts. Press on the far side away from the tab to pop the edge of the knockout up.
Grab on to the knockout with pliers and bend it back and forth until the remaining tabs break free. Discard the
knock out plate.
Second Layer
In each of the four holes, you will see the next layer of knockouts. Remove the knockouts using the same
technique described above.
Page 26 of 33
CoolSmart TV
864, PB 42 Linear, PB 42 CF, 4415 HO
Sku# 98900779
17602029- 9/24/19
© Travis Industries, Inc.
Advertisement
Table of Contents
