Table of Contents
Advertisement
4
Under each knock out plate, you will find a cover plate held in place with (2) ¼" screws. Use a nut driver
or drill with an extension to remove the (2) screws. Reach in and remove the cover plate. You may
discard the plates.
5
Insert a starter collar into each of the holes that were uncovered in the previous step and bend the tabs to
secure the starter collar to the fireplace.. Seal the joints with silicone caulk or aluminum (U.L. 181A-P)
tape
Use silicone to seal the
starter collar to the top
of the fireplace.
Bend the tabs on the
bottom of the starter
collar up to lock it in
place.
6
Install the fireplace into the framed chase. See section "Installation" in the manual.
Page 18 of 33
CoolSmart TV
864, PB 42 Linear, PB 42 CF, 4415 HO
Sku# 98900779
Starter Collar
17602029- 9/24/19
© Travis Industries, Inc.
Advertisement
Table of Contents
