Garmin GTN 625 Pilot's Manual Upgrade Supplement page 36

7.8.2
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Touch to Select
Terrain
LAT/LON Format
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
7-20
Waypoint Location Based on LAT/LON
1. From the Create User Waypoint page, touch the Position
key and then the LAT/LON key. Next, touch the
Latitude/Longitude value key.
Figure 7-27 Waypoint Info - Create User Waypoint Type - LAT/LON
2. The Lat/Lon coordinate values will be highlighted. Touch the
Lat or Lon key to toggle selection of the hemisphere values
and highlight the selected value. The Large knob may also be
used for cursor movement and characters selected with the
Small knob. Use the Large knob to backspace or move the
cursor to the left.
Touch to Select
Hemisphere Value
Figure 7-28 Waypoint Info - Set Lat/Lon Coordinates
3. Touch the desired hemisphere keys to select the desired values.
After selecting the hemisphere value, the cursor will advance to
the first character of the adjacent numeric value for selection.
Even when the hemisphere values are highlighted, touching
a valid numeric key will always place the cursor at the first
numeric value.
4. When finished with the Lat/Long selections, touch the Enter
key.
5. When finished with all selections, touch the Create key to
create the new waypoint.
GTN 625/635/650 Pilot's Guide
Touch to Select
Lat/Lon Waypoint
Reference Type
Touch to Select
Lat/Lon Values
Touching The Lat Key Activates The Latitude
Hemisphere Value for The Selection
Touch to Toggle
Lat/Lon Selection
Touch to Select
Numeric Values
190-01004-03 Rev. N