Create Waypoint - Garmin GTN 625 Pilot's Manual Upgrade Supplement

7.8
Foreword
User waypoints are created from the Create User Waypoint page. To create a
Getting
new user waypoint, simply enter its name (identifier) and position, or reference
Started
another waypoint by radial and distance.
Audio &
Xpdr Ctrl
Com/Nav
Waypoint Name
FPL
Waypoint
Comment
Direct-To
Touch To Setup
Proc
Ref Wpt
Wpt Info
Map
Traffic
Terrain
User Waypoint
Name
Weather
Alphanumeric
Keypad For
Nearest
Selected Range
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
7-18

Create Waypoint

Figure 7-24 Waypoint Info - Create User Waypoint
1. From the Waypoint Info page, touch the Create Wpt key.
2. Touch the User Identifier key.
3. Use the keypad to type the waypoint name (up to six characters)
and then touch Enter.
Figure 7-25 Waypoint Info - Create User Waypoint Name
4. If desired, touch the Airport key to make the waypoint a user
airport.
5. Touch the Comment key to add a short comment for the new
waypoint.
6. Touch the Position key and then Lat/Lon, Radial/Radial,
or Radial/Distance to assign the type. See the following
instructions for more detail.
GTN 625/635/650 Pilot's Guide
Touch To Set
As User Airport
Selected
Character Range
Touch To View
Area Map
Temporary
Waypoint
Touch To Set User
Airport Elevation
Backspace
Key Clears
Wpt Name
Touch Enter
After Creating
Name
190-01004-03 Rev. N