Operating The System - Philips FW748P/22 User Manual

CONTROLS
• CENTER +/-
– to adjust the sound level of the center
speaker.
ª TEST TONE
– to check the sound level of the Front
Left, Front Right, Center and Surround
speakers.
º MUTE
– to switch off the sound temporarily.
⁄ SIDE (available in model FW798W
only)
– to change side when playing in Tape 2
mode.
¤ B
– to switch the system to standby mode.
Notes for remote control:
– First select the source you wish to
control by pressing one of the
source select keys on the remote
control (e.g. CD, TUNER, TAPE 1/2 or
AUX).
– Then select the desired function
( É , í , ë , etc.).
10

OPERATING THE SYSTEM

MINI HIFI SYSTEM
PROGRAM SHUFFLE
REPEAT TIMER REC
NEWS T.A. AM MW FM LW
60Hz
STANDBY
ON
CLOCK/
CD1 • 2 • 3
TIMER
CD
PROG
SEARCH • TUNING
UP
DOWN
DIGITAL
SOUND CONTROL
Important:
Before you operate the system,
complete the preparation procedures.
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the
system. When the system is switched
on for the first time, the demonstration
mode will start automatically.
Notes:
– During the demonstration, if you press
any source (or standby-on) button, the
system will switch to the respective
mode (or standby).
– When the system is switched to standby
mode, the demonstration will resume 5
seconds later.
C
STEREO
BACK
FRONT HSD
L R
8KHz
250Hz 500Hz 1KHz 2KHz 4KHz
PRO LOGIC
S
BAND TAPE 1 • 2 VIDEO
TUNER TAPE AUX
PRESET
STOP • CLEAR PLAY PAUSE PREV NEXT
SOUND NAVIGATION
DYNAMIC
BASS BOOST
To stop the demonstration mode
• Press and hold STOP•CLEAR Ç (on
the system only) for 5 seconds when
the system is in demonstration mode.
™ The demonstration will stop.
™ "DEMO OFF" is displayed.
™ The system will switch to standby
mode.
Note:
– If the AC power cord is disconnected
and reconnected to the wall socket, the
demonstration will remain off until the
demonstration is switched on again.
DOLBY B
S
NR
RDS
NEWS!
VOLUME