Clock; Timer - Philips FW748P/22 User Manual

CLOCK

MINI HIFI SYSTEM
PROGRAM
REPEAT
NEWS T.A.
STANDBY
ON
CLOCK/
C D 1 • 2 • 3

TIMER

PROG
SEARCH • TUNING
UP
DOWN
SOUND CONTROL
Viewing the Clock
You can view the clock (if it is set) while
the system is in standby mode or any
source mode. It will be displayed for about
7 seconds.
• Press CLOCK/TIMER briefly (on the
system only) .
™ "10:38" (the current time) will be
displayed.
™ "--:--" will be displayed if the
clock is not set.
22
SHUFFLE STEREO
BACK
TIMER REC
FRONT HSD
AM MW FM LW
L
L
60Hz 250Hz 8KHz
500Hz 1KHz 2KHz 4KHz
PRO LOGIC
PRO LOGIC
S
S
BAND
TAPE 1 • 2 VIDEO
CD TUNER TAPE AUX
PRESET
STOP • CLEAR PLAY PAUSE PREV NEXT
SOUND NAVIGATION
DIGITAL DYNAMIC
BASS BOOST
Setting the Clock
The clock is set in 24-hour mode, e.g.
"00:00" or "23:59". Before setting
the clock, you must be in the View Clock
mode.
1 Press CLOCK/TIMER to select clock
mode.
™ "00:00" or the current time starts
flashing.
2 Set the hour with à or á.
3 Set the minute with í or ë.
4 Press CLOCK/TIMER again to store the
setting.
™ The clock starts.
• To exit without storing the setting, press
Ç on the system.
Notes:
– During clock setting, if no button is
C
C pressed within 90 seconds, the system
R
R
will exit clock setting mode
S DOLBY B
S
NR
automatically.
RDS
– When a power interruption occurs, the
NEWS!
clock setting is erased.
VOLUME
TIMER
Timer Setting
• The system can switch on to CD or
TUNER mode automatically at a preset
time. It can serve as an alarm to wake
you up.
• Before setting the timer, make sure the
clock is set correctly.
• The timer will always be switched on
once it is set.
• The volume of the timer will start to
increase from the minimum level
until the volume level before the set
is switched to standby mode.
1 Press and hold CLOCK/TIMER for more
than 2 seconds to select timer mode.
™ "00:00" or the last set timer starts
flashing. The flag flashes.
TIMER
™ The last selected source is lit while
other available sources are flashing.
2 Press CD or TUNER to select the
desired source.
3 Press à or á to set the hour for the
timer to start.
4 Press í or ë to set the minute for
the timer to start.
5 Press CLOCK/TIMER to store the start
time.
™ The timer is now set.
™ The flag remains on the display.
TIMER
• At the preset time, the timer will be
activated.
™ The selected source will be played.