Philips FW748P/22 User Manual page 12

OPERATING THE SYSTEM
You can change the digital sound setting
level for all but CLASSIC with the JOG.
• First select the DSC feature, then press
JOG 3 or 4 until the desired digital
sound setting level is reached.
™ The digital sound setting level will
increase or decrease between level 1
and 5.
Note:
– For neutral setting, select CLASSIC and
switch off DBB.
DYNAMIC BASS BOOST (DBB)
There are three DBB settings to enhance
the bass response.
• Press DBB briefly to select a bass boost
level.
™ The respective DBB level is being
encircled and lit.
™ "BEAT", "PUNCH" or "BLAST"
will be displayed.
To switch off DBB
• Press DBB briefly until "DBB OFF" is
displayed.
Note:
– Some CDs or tapes might be recorded in
high modulation. It may cause a
distortion at high volume. If this occurs,
switch off DBB or reduce the volume.
12
Automatic DSC-DBB selection
The best DBB setting is generated
automatically for each DSC selection. You
can manually select the DBB setting that
best suits your listening environment.
MUTE (only on remote control)
This feature allows you to temporarily
switch off the sound without switching off
the system when you require a moment of
silence.
• Press MUTE on the remote control to
switch off the sound.
™ "MUTE" will be displayed.
• Press MUTE again on the remote
control or increase the VOLUME level
to switch on the sound.