Philips FW748P/22 User Manual page 11

To start the demonstration mode
• Press and hold STOP•CLEAR Ç (on
the system only) for 5 seconds when
the system is in standby mode.
™ The demonstration will begin.
Easy Set
EASY SET allows you to store all available
radio stations automatically.
1 Press and hold STANDBY ON (on the
system only) for 5 seconds ; when the
system is in standby or demonstration
mode.
™ "EASY SET" will be displayed,
and followed by "TUNER" and then
"AUTO".
™ EASY SET will start searching for all
radio on FM band and then followed
by radio stations on MW and LW
band respectively.
™ All available radio stations with
sufficient signal strength will be
stored. Up to 40 presets may be
stored.
Notes:
– EASY SET will start with the FM band, if
there are still presets available, it will
continue to store the FM, MW and LW
bands respectively.
– When EASY SET is used, all previously
stored radio stations will be replaced.
– The last preset radio station will appear
on the display when EASY SET is
completed.
Switching the system ON
• Press STANDBY ON (on the system
only) , CD, TUNER, TAPE or AUX.
You can also switch on the system by
pressing any one of the CD DIRECT PLAY
buttons.
Switching the system to
standby mode
• Press STANDBY ON again or B on the
remote control.
™ The system will switch to standby
mode.
Selecting the Source
• Press the respective source selection
button: CD, TUNER, TAPE or AUX.
™ The display indicates the selected
source.
Note:
– For an external source, make sure you
have connected the audio left and right
OUT terminals of the external
equipment (TV, VCR, Laser Disc player or
DVD player) to the AUX IN terminals.
Selecting the Equalizer
Display
You can select the desired equalizer display
for the system. You must not press the DSC
button on the system before using the JOG.
• Press the JOG 3 or 4 to select the
desired Equalizer Display, NORMAL,
TOP DOWN, or NITE MODE.
™ The selected display will be shown.
NORMAL Display
PROGRAM SHUFFLE STEREO
REPEAT TIMER REC BACK
FRONT HSD
NEWS T.A. AM MW FM LW
60Hz 250Hz 500Hz 2KHz 4KHz 8KHz
1KHz
TOP DOWN Display
PROGRAM SHUFFLE STEREO
REPEAT TIMER REC BACK
FRONT HSD
NEWS T.A. AM MW FM LW
60Hz 250Hz 500Hz 2KHz 4KHz 8KHz
1KHz
NITE MODE Display
PROGRAM SHUFFLE STEREO
BACK
REPEAT TIMER REC
FRONT HSD
NEWS T.A. AM MW FM LW
60Hz 250Hz 500Hz 1KHz 2KHz 4KHz 8KHz
OPERATING THE SYSTEM
Note:
– In NITE MODE, all lights will be
switched off and the display brightness
will be dimmed.
Sound Control
VOLUME ADJUSTMENT
Adjust VOLUME to increase or decrease
the sound level.
For Personal Listening
Connect the headphones plug to the n
socket at the front of the system. The
speakers will be muted.
DIGITAL SOUND CONTROL (DSC)
The DSC feature enables you to adjust the
system to suit your type of music.
• Press DIGITAL SOUND CONTROL
(DSC) to select OPTIMAL, CLASSIC,
TECHNO, JAZZ, ROCK or VOCAL.
™ The selected digital sound is
encircled.
™ "OPTIMAL X, CLASSIC,
TECHNO X, JAZZ X, ROCK
X or VOCAL X" will be
displayed. "X" is the pre-selected
level.
11