Tape Operation/Recording; Loading Tape; Playing Tapes - Philips FWM390/25 User Manual

Tape Operation/Recording

IMPORTANT!
– Before playing a tape, check and tighten
slack tape with a pencil. Slack tape may get
jammed or may burst in the mechanism.
– C-120 tape is extremely thin and is easily
deformed or damaged. It is not
recommended for use in this system.
– Store the tapes at room temperature and
do not put them too close to a magnetic
field (for example, a transformer, TV or
speaker).

Loading tape

1
Press OPEN to open the tape deck door.
2
Load the tape with the open side downward and
full spool to the left.
3
Close the tape deck door.
22

Playing tapes

To playback a selected tape deck
1
Press TAPE (or TAPE 1/2 on the remote
control) repeatedly to select tape deck 1 or 2.
2
Press É Å .
To stop playback
G Press Ç.
To select automatic replay or one time
playback
G Press A. REPLAY (or REPLAY on the Remote
Control) repeatedly to select the different
playback modes.
➜ "AUTO REPLAY" (
is displayed.
AUTO REPLAY ...the tape will rewind
automatically at the end of
playback and replay again. It will
replay up to a maximum of 20
times.
ONCE .............. the tape will playback the
selected side once and then stop.
) or "ONCE" ( )