Tape Operation/Recording; Tape Playback; General Information On Recording - Philips FWD182 User Manual

IMPORTANT!
– Before playing a tape, check and
tighten slack tape with a pencil. Slack
tape may get jammed or may burst in
the mechanism.
– Store tapes at room temperature and
do not put them too close to a magnetic
field (for example, a transformer, TV set
or speaker).

Tape playback

●
Only cassette keys can be used for tape playback
control!
1
Press OPEN 3 to open the tape deck door.
2
Insert a recorded tape and close the tape door.
●
Load the tape with the open side down and the
full spool to the left.
3
Press TAPE on the remote control to select
tape mode.
4
Press 3 to start playback.
Interrupting playback
● Press 8 to interrupt playback.
Stopping playback
● Press 7 to stop playback.

Tape Operation/Recording

Rewinding or forwarding fast when
playback is stopped
1
Press 1 or ¡ on the front panel.
2
Press 7 when you reach the desired passage.
Resetting tape counter number
● In stop mode, press 7.
General information on
recording
●
If you don't intend to record via the
microphone, unplug it to avoid unwanted
recording source.
●
For recording, only use tape of IEC type I(normal
tape).
●
The recording level is set automatically,
regardless of the position of the Volume, Vocal,
Key control and so forth.
●
The type is secured at both ends with leader
tape.
●
To prevent accidental recording, break out the
tab on the left shoulder of the tape side you
want to protect.
●
Press REC in Disc, Tuner or AUX mode. The
record key ● cannot be pressed if there is no
recordable tape in the tape deck.
35