Specifications - Philips FWM390/25 User Manual

AMPLIFIER
Output power ................................... 2 x 120 W MPO
.................................................................... 2 x 60 W RMS
Signal-to-noise ratio .......................... ≥ 67 dBA (IEC)
Frequency response .......................... 50 – 15000 Hz
Input sensitivity
AUX/CDR In .......................................... 500 mV / 1V
Output
Speakers .................................................................... ≥ 6 Ω
Headphones ...................................... 32 Ω – 1000 Ω
(1) (6 Ω, 1 kHz, 10% THD)
CD/MP3-CD PLAYER
Number of programmable tracks ......................... 99
Frequency response .......................... 20 – 20000 Hz
Signal-to-noise ratio ....................................... ≥ 80 dBA
Channel separation .......................... ≥ 60 dB (1 kHz)
Total harmonic distortion ........................... < 0.003%
MPEG 1 Layer 3 (MP3-CD) .......... MPEG AUDIO
MP3-CD bit rate ....................................... 32-256 kbps
Sampling frequencies ....................... 32, 44.1, 48 kHz
TUNER
FM wave range ................................... 87.5 – 108 MHz
MW wave rang ................................... 531 – 1602 kHz
LW wave range ..................................... 153 – 279 kHz
Number of presets ........................................................ 40
Antenna
FM ....................................................................... 75 Ω wire
AM .............................................................. Loop antenna
(1)
(128 kbps advised)

Specifications

TAPE PLAYER
Frequency response
Normal tape (type I) ...... 80 – 12500 Hz (8 dB)
Signal-to-noise ratio
Normal tape (type I) ................................. ≥ 48 dBA
Wow and flutter ......................................... ≤ 0.4% DIN
SPEAKERS
System .................... 3-way; double port bass reflex
Impedance ........................................................................ 6 Ω
Woofer ................................................................... 1 x 5.25"
Tweeter ...................................................................... 1 x 2.5"
Dimensions (w x h x d) . 406 x 266 x 384 (mm)
Weight ............................................................. 3.03 kg each
GENERAL
Material/finish ................................... Polystyrene/Metal
AC Power ..................................... 220 – 230 V / 50 Hz
Power Consumption
Active ......................................................................... 60 W
Standby .................................................................. ≤ 25 W
Eco Power standby ......................................... < 1 W
Dimensions (w x h x d) .. 608 x 386 x 462 (mm)
Weight (without speakers) .............................. 7.23 kg
Specifications and external appearance are
subject to change without notice.
27