Set The Sleep Timer; Play From An External Device; Product Information; Specifications - Philips DCM292/07 User Manual

Set the sleep timer

This unit can switch to standby automatically
after a set period of time.
1
When the unit is turned on, press
SLEEP/TIMER repeatedly to select a set
period of time (in minutes).
»
When sleep timer is activated,
displayed.
2
Press SLEEP/TIMER repeatedly until
[OFF] (off) is displayed.
»
When sleep timer is deactivated,
disappears on the display.

Play from an external device

You can also listen to an external audio device
through this unit.
1
Press USB/MP3 LINK to select the MP3
link source.
2
Connect the supplied MP3 link cable to:
• the MP3 LINK jack (3.5mm) on the
unit.
• the headphone jack on an external
device.
3
Start to play the device (see the device
user manual).
18 EN
8 Product
Note
is
•
Product information is subject to change
without prior notice.
Specifications
Amplifier
Total output power 2 x 10 W RMS
Frequency
response
Signal to noise ratio > 60 dB
MP3 link input
Disc
Laser type
Disc diameter
Support disc
Audio DAC
Total harmonic
distortion
Frequency
response
Signal to noise ratio > 55 dBA
Tuner
Tuning range
Tuning grid
Number of presets 20
information
80 Hz - 16 kHz, ± 3 dB
0.5 V RMS 20 k
Semiconductor
12 cm /8 cm
CD-DA, CD-R,
CD-RW, MP3-CD,
WMA-CD
24 Bits / 44.1 kHz
< 1.5%
60 Hz -16 kHz (44.1 kHz)
FM: 87.5 - 108 MHz
100 KHz