Turn On; Play; Play A Disc; Play From Usb - Philips DCM292/07 User Manual

2
Press / repeatedly to select 12 hour
or 24 hour format.
3
Press PROG/CLOCK SET to confirm.
»
The hour digits are displayed and begin
to blink.
4
Press / to set the hour.
5
Press PROG/CLOCK SET to confirm.
»
The minute digits are displayed and
begin to blink.
6
Press / to set the minute.
7
Press PROG/CLOCK SET to confirm the
clock setting.

Turn on

1
Press .
»
The unit switches to the last selected
source.
Switch to standby
1
Press again to switch the unit to
standby mode.
»
The clock (if set) appears on the
display panel.
To switch the unit to Eco Power Standby
mode:
1
Press and hold
seconds.
»
The backlight on the display panel
turns off.
Tip
•
The unit switches to Eco Power Standby mode
after 15 minutes in standby mode.
To switch between standby mode and Eco
Standby Mode:
1
Press and hold
seconds.
for more than 2
for more than 2

4 Play

Play a disc

1
Press CD to select the disc source.
2
Press to open the disc compartment.
3
Insert a disc with the printed side facing
outward.
4
Press to close the disc compartment.
»
Play starts automatically. If not, press
.

Play from USB

Note
• Ensure that the USB device contains playable
audio content.
1
Insert the USB device into the
2
Press USB to select the USB source.
»
Play starts automatically. If not, press
.
• To select a folder, press
• To select an audio file, press
socket.
/ .
/ .
EN 13