FujiFilm FinePix S1500 Service Manual page 105

Confidential: FUJIFILM Service Center Use Only
4. Adjustments
FinePix S1500 Service Manual
<Step 1>
Set the S1500ADP for vibration generator in the vertical
position.
<Step 2>
[Preparing for SAB Cali]
(1) Ensure that the brightness of the chart surface is between 9.7 and 10.3 EV.
(2) Insert the adjustment SD card into the camera, and set it to Vibration generator.
(3) Set the Mode dial to " q " and then turn the camera on.
(4) Adjust the positions so that the distance from the front of the camera lens to the Gyro Gain Adjustment chart II is 1500 mm.
<Step 3>
When the screen shown on the right appears, press the Up
button to change to "E".
<Step 4>
When the screen shown on the right appears, press the Right
button.
4-47