FujiFilm FinePix S1500 Service Manual page 106

4. Adjustments
<Step 5>
Press the Down button to select "SAB Cali" and then press
the MENU/OK button.
<Step 6>
[Preparing for SAB Cali]
(1) The screen shown on the right appears.
(2) Turn on the power to the vibration generator and set the
MOTOR SWITCH to ON to start the jig vibrating.
(3) Adjust the oscillation frequency until the digital display
shows 80. (The actual frequency set is 8 Hz.)
When ready, press the "A dual IS" button.
<Step 7>
When (1) V:31 and (2) Y:OK appear as in the screenshot at
right, set MOTOR SWITCH for Vibration generator to OFF
and halt vibration.
* If Y:NG appears, check settings and perform adjustment
again.
4-48
G dual IS button
Confidential: FUJIFILM Service Center Use Only
FinePix S1500 Service Manual
(1)
(2)