FujiFilm FinePix S1500 Service Manual page 107

Confidential: FUJIFILM Service Center Use Only
FinePix S1500 Service Manual
<Step 8>
(1) Set the S1500ADP for vibration generator in the
horizontal position.
(2) Turn on the power to the vibration generator and set the
MOTOR SWITCH to ON to start the jig vibrating.
(3) Adjust the oscillation frequency until the digital display
shows 80. (The actual frequency set is 8 Hz.)
When ready, press the "x Intelligent Face Detection/red-eye
removal" button.
x Intelligent Face Detection/
<Step 9>
When (1) V:31 and (2) X:OK appear as in the screenshot at
right, turn camera power off.
* If X:NG appears, check settings and perform adjustment
again.
--> SAB Cali ends.
red-eye removal) button
4. Adjustments
(1)
(2)
4-49