Fisher-Price 71562 Manual page 11

Cordless nursery monitor
Table of Contents

Advertisement

PROBLEM
Charging indicator does
not light when receiver
is in base
No sound
PROBABLE CAUSE
AC adaptor not properly
connected
AC adaptor problem
Receiver not properly seated
in base
Receiver/base contacts dirty
Channel switches not on same
setting
Signal interference due to
other nursery monitors,
cordless telephones, etc.
Out of range or insufficient
signal
Volume not turned up
Low charge battery
in receiver
Improper antenna position
Check AC adaptor jack-to-socket and
plug-to-outlet connections.
Test the receiver using the other AC adaptor.
If the receiver works with the other AC adaptor,
call Fisher-Price at 1-800-432-KIDS to replace
the broken AC adaptor.
Reposition the receiver so that it is properly
seated in base.
Clean metal contacts on bottom of receiver
and in base with a pencil eraser.
Check channel switch on transmitter and
receiver.
Change the channel setting on both the
transmitter and the receiver.
Identify and eliminate the source of
interference.
Test reception by moving the transmitter
and/or receiver to different locations through-
out the house. Relocate the transmitter
and/or receiver.
Test reception by moving the transmitter
and/or receiver to different locations through-
out the house. Relocate the transmitter
and/or receiver.
Adjust volume control on receiver.
Use AC adaptor with receiver in base
to monitor and charge battery.
Make sure antenna is pointing upward.
1 1
SOLUTION

Advertisement

Table of Contents
loading

Table of Contents