System Status Messages In Line 23 - Fujitsu BS2000 SE Series Operating Manual

General SVP frame structure

4.2.2 System status messages in line 23

The following picture shows the extended area of the system status messages in line 23:
.... + .... 0 .... + .... 0 .... + .... 0 .... + .... 0 .... + .... 0 .... + .... 0 .... + .... 0 .... + .... 0
Figure 3: Format of the extended area of the status display in line 23
Meaning of the status messages in line 23:
Column Icon
63 - 64
66 - 67
70 - 73
75 - 76
78 - 80
16
1 2
Meaning
none The SVP is in user mode
CE The SVP is in maintenance mode
CM The SVP is in hot system maintenance mode
HD Hard disk 2 or MO (Magneto Optical disk) is online
FD A formatted floppy disk is mounted in the FD drive
none The system is in the user mode
TEST The system is in test mode = maintenance mode
(display together with CE)
none The power supply is okay
PW (Power Warning)
An error has occurred in the power supply of the server
none No machine error
CHK (machine check)
A machine error occurred in the server
3 4
Maintenance mode
Hard disk/floppy disk
Test mode
Power alarm
System check
Operating the service processor
5 6
CE HD TEST PW CHK
CM FD
U41859-J-Z126-2-76
7 8