4 Operating the service processor
The service processor (SVP) is operated under menu guidance via the "SVP Console
Window". The SVP console window is made available by the SE Manager when the SVP
console is called.
Jobs are assigned to the service processor via special SVP frames (in this chapter abbre-
viated to: frames). All the information you require as an operator working with the frames
can be found in this chapter.
After switching on the MU and the Server Unit, BS2000 operation must be prepared, i.e. the
BS2000 operating system must be loaded (IPL = Initial Program Load). The following activ-
ities may be required for the IPL:
select the IORSF (Input/Output Resource File) and start the IMPL (Initial Micro Program
●
Load)
This is only necessary if you want to load another IORSF.
specify the operating mode (Native/VM2000)
●
This is only necessary if you want to change the mode setting.
start IPL using PROGRAM LOAD FRAME
●
To do this you may have to redefine device parameters in the DETAIL-1 frame.
configure an automatic IPL (POWER ON IPL)
●
The following sections provide examples of standard processing relevant to loading of
BS2000. There is also an description of how to select a particular configuration and how to
re-initialize the SVP.
Standard processing at the SKP console at a glance:
Selecting IORSF
●
Re-initializing SVP
●
Setting up PROGRAM LOAD FRAME: PRESET-1
●
Setting up PROGRAM LOAD FRAME: PRESET-2
●
Setting the operating mode for "loading BS2000 / VM2000" using PROGRAM LOAD
●
FRAME: DETAIL-2
Executing IPL in PROGRAM LOAD FRAME: DETAIL-1
●
U41859-J-Z126-2-76
11