Controls - Fujitsu BS2000 SE Series Operating Manual

Front of the HNC

Controls

ID
RST or
RESET
NMI
72
Identification (ID) button
Lights up (blue) on the front and on the rear of the HNC when the ID button is
pressed. The two ID indicators are synchronized.
On/Off button
When the HNC is switched off, it is switched on again by pressing the On/Off
button once.
When the HNC in is in operation, it is switched off by pressing the On/Off
button once.
V
CAUTION!
Possible loss of data!
I
The On/Off switch does not disconnect the server from the voltage
grid. To disconnect from the mains completely, remove the power
plugs.
Reset button
Pressing the Reset button reboots the HNC.
V
CAUTION!
Possible loss of data!
NMI button
V
CAUTION!
Do not press! Possible loss of data! The NMI button may only be used
by Customer Support.
HNC (High Speed Net Connect)
U41859-J-Z126-2-76