Led Indicators For Ports, System And Power Status - Fujitsu BS2000 SE Series Basic Operating Manual

7.1.3 LED indicators for ports, system and power status

On Brocade ICX 6450 models LEDs indicate the status of the ports, of the system, and the power status of the
device.
Port status LED indicator
Figure 38: Port status LED indicator (ICX 6450-24)
Figure 39: Port status LED indicator (ICX 6450-48)
(1) or (1) and (2) display the ports with status LEDs.
The following status indicators are possible:
LED Display and meaning
Ethernet
SFP/SFP+ (X1-X4)
Out-of-band
management port
(2 LEDs)
Table 5: Meaning of the port status LED indicator
Lights up green and flashes when the port is transferring and receiving data packets.
Does not light up when no connection to a remote port exists.
Lights up green when the port is transferring 10 Gbps.
Lights up green and flashes
Lights up yellow when the port is transferring 1 Gbps.
Lights up yellow and flashes
Does not light up when no connection to a remote port exists.
Not used
when data packets are being transferred and received.
when data packets are being transferred and received.
72