Table of Contents
Advertisement
for provisioning, managing, running diagnostics, monitoring, and reporting on all CTP Series devices and circuits in the
network.
For more information on CTP151 hardware, see the
Package Contents
The CTP151 device is shipped with the following parts:
One pair of front-mounting brackets
Eight screws to secure the mounting brackets to the chassis
4 rubber feet
RJ-45 cable and RJ-45 to DB-9 serial port adapter
USB 2.0 Standard-A to Mini-USB cable
*
AC power cord
AC power cord retainer clip
Documentation Roadmap
End User License Agreement
*
By default, one AC power cord that is suitable for use in the U.S. is supplied with the device. If you need a power cord
for use in another country, you must order it while purchasing the CTP151 device.
NOTE:
To mount the chassis on a rack or a cabinet, you must provide mounting screws that are appropriate for
your rack or cabinet.
Register the Product
Register product serial numbers on the Juniper Networks website and update the installation base data if there is any
addition or change to the installation base or if the installation base is moved. Juniper Networks will not be held accountable
for not meeting the hardware replacement service-level agreement for products that do not have registered serial numbers
or accurate installation base data.
Register your product at https://tools.juniper.net/svcreg/SRegSerialNum.jsp.
Update your installation base at https://www.juniper.net/customers/csc/management/updateinstallbase.jsp.
CTP151 Hardware
Guide.
2
Advertisement
Table of Contents
