BEA LZR-FLATSCAN REV-LZ User Manual page 6

5
Connect the plug to the white connector.
7
Close the sensor which will not be connected to the
door controller using a plug.
1b
EXTEND CABLE OUTSIDE THE SENSOR
1
Take the flexible tube and determine how long it
should be in order to reach the door controller.
6
6
Make sure that all wires are safely tucked within the
notch to avoid crushing them with the cover.
8
«click»
Fasten the lock screw firmly.
2
Cut the surplus to avoid undesired detections caused
by the flexible tube.