Fault Log - 3Com TR User Manual

6-8 C 6: M
HAPTER ONITORING THE

Fault Log

The Fault Log displays read-only information about
the Switch 2000 TR. The Fault Log updates whenever
an abnormal condition occurs. This information is for
internal 3Com use only. Your supplier may ask you to
quote the Area and Fault Number if you report a
problem.
To view the Fault Log, take these steps from the
Switch 2000 TR Main Menu:
Select STATUS and press [Return].
1
The TR Status screen appears.
Select FAULT LOG and press [Return].
2
Figure 6-7 TR Fault Log Screen
The TR Fault Log screen appears and the screen dis-
plays the following:
Reset Count—The number of resets recorded at the
time of the fault.
S 2000 TR
WITCH
Time (seconds)—The time elapsed between the last
reset when the fault occurred.
Area—Information useful for fault diagnosis by tech-
nical support.
Fault Number—A hexadecimal number indicating
the type of fault. Give this number to your technical
support representative.