Setting Up The Vt100 Console - 3Com TR User Manual

3-10 C 3: S
HAPTER ETTING

Setting Up the VT100 Console

This section provides instructions for setting up the
VT100 console for local or remote management.
Connect a VT100-compatible terminal to the serial
1
port of the Switch 2000 TR. Configure the terminal to
the following settings:
9600 baud
8 data bits
1 stop bit
No parity
Press [Return] one or more times until the Switch
2
2000 Main Banner appears. See Figure 3-5.
Figure 3-5 Main Banner
NOTE: You cannot modify these settings. If your ter-
minal is already set up with these values, the Main
Banner appears as soon as power-up completes.
Press [Return] at the Main Banner.
3
U M
P FOR ANAGEMENT
Log on using the default name security and pass-
4
word security. See Figure 3-6.
Figure 3-6 Logon Screen
Select OK. The Main Menu appears. See Figure 3-7.
5
Figure 3-7 Main Menu
Select the Management Setup option.
6
The 3Com Switch 2000 TR Management Setup screen
appears. See "Switch 2000 TR Management Setup Fields" .