Table of Contents
Advertisement
Resetting the Switch 2000 TR
This section provides instructions for resetting the
Switch 2000 TR.
Because some configurable parameters require that
you reset the Switch 2000 TR after making changes, it
is important to understand the reset procedure before
proceeding.
You have four different ways to reset the Switch 2000
TR:
VT100 Console
LCD Console
Reset button
Power cycle
VT100 Console Reset
The Switch 2000 TR must be reset after making cer-
tain changes using the VT100 interface. You may
make more than one change before committing them
to memory by resetting.
To reset the Switch 2000 TR from the VT100 interface
when you have made changes, take these steps:
Select RESET from the Switch 2000 TR Main Menu.
1
The Switch 2000 TR TR Reset screen appears. See
Figure 3-15.
Select OK to confirm the reset or CANCEL to stop the
2
reset. If you select OK you will be prompted to con-
firm again.
Resetting the Switch 2000 TR
The Switch 2000 TR resets.
Figure 3-15 Switch 2000 TR Reset Screen
LCD Console Reset
When you make certain parameter changes using the
front panel LCD console, you must commit them to
system memory by performing a reset.
To reset the Switch 2000 TR using the LCD, proceed
as follows:
Press [Up or Down Arrow] until Switch 2000
1
TR>Reset appears.
Press [Enter].
2
The Confirm RESET? screen appears.
Press [Enter] to confirm.
3
If you decide not to reset at this point you may press
[Left Arrow] to cancel and return to the previous
screen.
The Switch 2000 TR resets.
3-21
Advertisement
Table of Contents
