Table of Contents
Advertisement
▍
BIOS Setup
Power
▶
ACPI Sleep State
This item specifies the power saving modes for ACPI function. If your oper-
ating system supports ACPI, you can choose to enter the Standby mode in
S1 (POS) or S3 (STR) fashion through the setting of this field.
▶
Restore AC Power Loss
This setting specifies whether your system will reboot after a power failure
or interrupt occurs. Available settings are:
[Power Off]
[Power On]
[Last State]
▶
Deep S5
The setting enables/disables the Deep S5 power saving mode. S5 is almost
the same as G3 Mechanical Off, except that the PSU still supplies power,
at a minimum, to the power button to allow return to S0. A full reboot is
required. No previous content is retained. Other components may remain
powered so the computer can "wake" on input from the keyboard, clock,
modem, LAN, or USB device.
3-18
Leaves the computer in the power off state.
Leaves the computer in the power on state.
Restores the system to the previous status before
power failure or interrupt occurred.
Advertisement
Table of Contents
