Jumper - MSI MS-98D6 Manual

JuMper

Clear CMOS Jumper: JCMOS1
There is a CMOS RAM onboard that has a power supply from an external
battery to keep the data of system configuration. With the CMOS RAM,
the system can automatically boot OS every time it is turned on. If you
want to clear the system configuration, set the jumper to clear data.
1
JCMOS1
Important
You can clear CMOS by shorting 2-3 pin while the system is off. Then
return to 1-2 pin position. Avoid clearing the CMOS while the system is
on; it will damage the mainboard.
AT/ATX Select Jumper: JAT1
This jumper allows users to select between AT and ATX power.
1
JAT1
Important
Avoid adjusting the jumper when the system is on; it will damage the
board.
1
Keep Data(Default)
Clear CMOS
1
AT Power
MS-98D6
1
1
ATX Power
(default)
2-13