▍
BIOS Setup
▶
Mode Select
Select an operation mode for the serial port 5/ 6.
▶
Parallel Port
This setting controls the FIFO data transfer mode.
▶
Change Settings
This setting is used to change the address & IRQ settings of the
parallel port.
▶
Device Mode
Select an operation mode for the parallel port.
▶
FIFO Mode
This setting controls the FIFO data transfer mode.
▶
Watch Dog Timer
You can enable the system watch-dog timer, a hardware timer that
generates a reset when the software that it monitors does not re-
spond as expected each time the watch dog polls it.
▶
H/W Monitor
These items display the current status of all monitored hardware devices/
components such as voltages, temperatures and all fans' speeds.
3-10