Auto Zoom
You can set the machine to automatically select the appropriate copy ratio based on
the size of the original and the selected copy paper. The same copy ratio is used for
the horizontal (X) and vertical (Y) axes. Any copy ratio from 25% to 400% can be
set.
IMPORTANT
•
2
You cannot use the Auto setting on the Copy Ratio screen with the Automatic Paper
Selection, Image Repeat (Auto), or Tab Paper mode.
•
You cannot copy highly transparent originals, such as transparencies, using the Auto
setting on the Copy Ratio screen. Use the Preset Zoom or Zoom by Percentage mode
instead.
•
To use the Auto setting on the Copy Ratio screen, your originals must conform to one of
the standard paper sizes:
11" x 17", LGL, LTR, LTRR, STMT, or STMTR. (You can place STMTR originals only on
the platen glass.)
NOTE
If you notice a difference between the automatic copy ratio and the actual copy size, you
can try to eliminate this error by making a Zoom Fine Adjustment in Adjustment/Cleaning
(from the Additional Functions screen). (See Chapter 4, "Customizing Settings," in the
Reference Guide.)
1
2-34
Changing the Copy (Zoom) Ratio
Place your originals © press [Paper Select].