Shifting The Original Image - Canon imageRUNNER C3220 Copying Manual

Shifting the Original Image

You can make copies with the entire original image shifted to the center or a corner.
IMPORTANT
•
The Shift mode cannot be used with the Multi-Page Enlargement, Image Repeat, Mirror
Image, or Tab Paper mode.
•
The Shift (No. Key Entry) mode cannot be used with the Image Combination or Booklet
mode, in addition to the modes mentioned above.
•
The Shift mode cannot be selected if you set the Different Size Originals mode in
4
combination with the Automatic Paper Selection mode.
•
If the original and the copy paper are the same size and the copy ratio is set at 100%, the
image of the original is not shifted.
•
The default setting is 'Center'.
•
If you use the numeric keys to enter the shift position, the original image may be partially
cut off on the copy, depending on the size of the original, the size of the copy paper, and
the amount of shift specified.
I Using the Arrow Keys
The [Center/Corner Shift] setting enables you to use the arrow keys on the touch panel
display to make copies with the entire original image shifted to the center or a corner.
4-2

Shifting the Original Image

Copy with the
Original Image
Original
Shifted to the Center
Copy with the
Original Image
Shifted to a Corner