Siemens SINAMICS SL150 Operating Instructions Manual page 73

LED Color
RUN / -
ERR
Green
Orange
Red
Green/red
Green/
orange
or
Red/orange
SINAMICS SL150 6SL38600UL432AA0Z
Operating Instructions Rev.201910281433 EXAMPLE
Status Description; cause
Off The electronic power supply is missing or
lies outside the permissible tolerance
range.
Continuous The component is ready for operation
light and cyclic DRIVE-CLiQ communication
is in progress.
Continuous DRIVE-CLiQ communication is being es‐
light tablished.
Continuous At least one fault is present in the com‐
light ponent.
LED is controlled irrespective of the cor‐
responding messages being reconfig‐
ured.
0.5 Hz flashing Firmware download in progress.
light
2 Hz flashing Firmware download is complete. Waiting
light for POWER ON.
Flashing light Component recognition via LED is acti‐
vated.
The color depends on the LED state
when component recognition is activated.
8.2 Fault and system messages
Remedy
-
-
-
Remedy and acknowledge fault.
-
Carry out a POWER ON.
-
Operation
73