Siemens SINAMICS SL150 Operating Instructions Manual page 46

Preparations for use
4.4 Transportation
NOTICE
Damage due to incorrect lifting
If the transport unit is lifted incorrectly, this can damage the decorative trim, cabinet doors, or
fans.
● Protect the cabinet and protruding parts against damage.
● Always lift the transport units with the appropriate spreading devices or hoisting tackle.
Procedure
1. If there are several holes, select which holes to use based on the center of gravity.
2. Push the lifting bars through the holes.
3. Place the sling ropes on the lifting bars so they are close to the cabinet. Secure the ends of
4. To lift the transport unit, use single sling ropes or two ropes with a cross stitch. Attach the
5. Lift the cabinet. Avoid shifting the center of gravity or distorting or damaging the cabinet.
46
Figure 4-3 Lifting bar label
the lifting bars using the splint.
Figure 4-4 Securing the lifting rods
crane rope to the lifting rods so it is close to the cabinet.
When suspended, the cabinet must be parallel to the ground.
SINAMICS SL150 6SL38600UL432AA0Z
Operating Instructions Rev.201910281433 EXAMPLE