Safety Instructions; Loading The Tool - Bostitch IC60-1-E Original Instructions Manual

© Bostitch

SAFETY INSTRUCTIONS

GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE
m IMPORTANT READ CAREFULLY: It is important that all operators read and understand all
compliance for the products.
sections of this Tool Technical Data manual and the separate Safety and Operating Instruction
GB
Manual which come with this tool. Failure to do so could result in you or others in the working
FR Reproduction interdite sans permission préalable. Les copies non autorisées de ce document ne
area to be seriously injured.
signifient en rien que les produits soient conformes aux normes CE.
m WARNING! Eye protection in accordance with 89/686/EEC, and with equal or greater grade than defined
DE Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte Kopien dieses Dokuments
in EN166 should be used. However all aspects of operators work, environment and other type/s of machinery
erfüllen nicht die CE-Richtlinien für Produkte.
being used, should also be considered when selecting any personal protection equipment. Note: Non-side
shielded spectacles and face shields alone do not provide adequate protection.
NL Mag niet worden vermenigvuldigd zonder toestemming. Onrechtmatige kopieën van dit document
willen niet zeggen dat de producten voldoen aan de CE-vereisten.
m WARNING! To prevent accidental injuries:
• Never place a hand or any other part of the body in fastener discharge area of tool.
DK Må ikke gengives uden tilladelse. Uautoriserede kopier af dette dokument udgør ikke CE overholdelse
• Never point tool at yourself or anyone whether it contains fasteners or not.
for produkterne.
• Never engage in horseplay.
• Never pull the trigger unless the nose is directed towards the work.
FI Ei saa jäljentää ilman lupaa. Tämän asiakirjan ilman valtuutusta tehdyt kopiot eivät muodosta tuotteille
• Always handle the tool with care.
CE-yhdenmukaisuutta.
• This tool is intended to be used for fastening wood to wood in pallet/crate and construction applications.
DO NOT USE for fastening harder materials which could cause buckling of the fasteners and damage to the
GR Απαγορεύεται η αναπαραγωγή χωρίς προηγούμενη άδεια. Τα μη εξουσιοδοτημένα
tool. If you are unsure of the suitability of this tool for certain applications, please contact your local sales
αντίγραφα του παρόντος εγγράφου δεν αποτελούν συμμόρφωση CE για τα προϊόντα.
office.
IT Vietata la riproduzione senza permesso. Le copie non autorizzate di questo documento non • Do not pull the trigger or depress the work safety yoke whilst loading the tool.
garantiscono la conformità CE per i relativi prodotti.
• To prevent accidental actuation and possible injury, always disconnect air supply:
1. Before making adjustments. 2. When servicing the tool. 3. When clearing a jam. 4. When tool is not in use.
NO Skal ikke reproduseres uten tillatelse. Ikke godkjente kopier av dette dokumentet oppfyller ikke
5. When moving to a different work area, as accidental actuation may occur, possibly causing injury.
kravene for CE-merking for produktet.
• Read the additional Safety & Operating instructions booklet before using tool.
• Do not use oxygen and combustible gases as an energy source for pneumatically operated tools.
PT Reprodução proibida sem autorização prévia. As cópias não autorizadas deste documento não estão
• The operation of this tool can cause sparks and act as a source of ignition for flammable fuels and gases.
em conformidade com a CE para os produtos.

LOADING THE TOOL

ES Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
conformidad con las normas CE de los productos.
m Warning! When loading the tool 1) Never place a hand or any part of the body in fastener discharge area of
the tool; 2) Never point the tool at self or anyone else; 3) Do not pull the trigger or depress the safety yoke as
SE Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
accidental actuation may occur, possibly causing injury.
conformidad con las normas CE de los productos.
1. Open the magazine: Pull down on the latch and swing the door open.
PL Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego
Swing magazine cover open. (Fig 1)
dokumentu nie stanowią deklaracji zgodności CE prezentowanych produktów.
2. Check adjustment: the nailer must be set for the length of nail to be used.
Nails will not feed smoothly if the magazine is not correctly adjusted.
CZ Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego
dokumentu nie stanowią deklaracji zgodności CE prezentowanych produktów.
To change the setting: (Figs 2a - 2c)
SK Rozmnožovanie bez povolenia je zakázané. Neoprávnené kópie tohto dokumentu nie sú v súlade s CE
a) Release the canister latch on the rear of the canister.
pre dané výrobky.
b) Pull out the canister bottom by swinging right to left until tabs disengage.
c) Inside the canister bracket there are settings in inches and millimeters. The canister is adjusted correctly
HU A dokumentum engedély nélkül nem sokszorosítható. Az engedély nélkül sokszorosított dokumentum
when the length of fastener being used is shown in the window of the canister bottom.
nem jelenti a termék CE-megfelelőségét.
d) Push back the canister bottom and engage the latch.
RO Reproducerea neautorizată este interzisă. Copiile neautorizate ale acestui document nu reprezintă
3. Load the coil of nails: (Fig 3)
conformitatea CE pentru produse.
Place a coil of nails over the post in the canister.
Uncoil enough nails to reach the feeder pawl and place the second nail between the teeth of the feeder pawl.
The nail heads fit in slot on the feeder pawl.