Getting Started; Step 1: Turning On The System; Step 2: Setting The Speakers - Philips HTR5204/12 User Manual

Getting Started

Step 1: Turning on the system

Before you start...
Make sure you have completed all the
necessary connections before proceeding.
Press the SOURCE button on the front
panel repeatedly to select:
DISC 6CH COAX IN
MP3 MODE
TV DISC 6CH....
OR
Press DISC/DI, RADIO, TV, AUX or
MP3 LINE-IN on the remote control.
Press DISC/DI to toggle between to
DISC 6CH, COAX IN or OPTI IN mode.
Press RADIO to toggle between FM
and AM/MW band.
If the audio input on this unit is
connected to your TV, press TV to hear
the TVs sound output through this unit.
Press AUX to switch to the external
device that is connected to the AUDIO
IN-AUX socket on this unit.
Press MP3 LINE-IN to switch to the
external device that is connected to the
MP3 Line-In socket on the front panel.
Turn off to standby mode
Press STANDBY-ON (2).
The display screen turns off.
18
1_htr5204_eu_eng.indd 18 1_htr5204_eu_eng.indd 18
OPTI IN
FM AM/MW AUX

Step 2: Setting the speakers

You can adjust the delay times (centre
and rear only) and volume level for
individual speakers. These adjustments
allow you to optimise the sound
according to your surroundings and
setup.
Before you start...
Press SURROUND on the remote
control to select Multi-channel surround
mode before you adjust the speaker
settings.
Adjust the speaker delay times
(Not available in STEREO mode)
A
Press STANDBY-ON (2) to turn on
the unit.
B
Press and hold PROGRAM on the front
panel for fi ve seconds to access the
system setup.
To adjust the audio delay for the
centre speaker
Press . or > until 'CENTER
DELAY' appears.
Press PROGRAM on the front panel.
Rotate the VOL control to change the
delay time. Select from : 5ms, 3ms, 2ms,
1ms or OFF (default setting).
To remain with the previous setting, do
not rotate the VOL control in the next
fi ve seconds.
2007-02-13 11:27:45 AM 2007-02-13 11:27:45 AM