Tuner Operations; Tuning To Radio Stations; Presetting Radio Stations - Philips HTR5204/12 User Manual

Before you start...
Please make sure the FM and AM/MW
antennas are connected.

Tuning to radio stations

A
Press SOURCE repeatedly until 'FM' or
'AM/MW' appears on the display panel.
(or press RADIO on the remote control).
B
Press or on the remote control to
start tuning.
The display panel will show 'SEARCH'
change until a radio station with suf cient
signal strength is found.
C B
Repeat step
the desired radio station
D
To ne-tune the reception of a weak
station, press
repeatedly until an optimal reception is
found.
Helpful Hint:
– If the FM radio station is transmitting RDS
(Radio Data System) data, the station name
and frequency will be displayed and stored.
Press DISPLAY on the remote control to view
the station frequency.

Presetting radio stations

You can store up to 40 preset radio
stations in the memory. There are three
different ways to program the radio
stations:
– Using auto install (for rst time setup
only)
– Using automatic preset
– Using manual preset
Helpful Hint:
– If no stereo signal is detected or less than
5 ( ve) stations are detected during radio
installation, 'PLEASE CHECK ANT' appears.
1_htr5204_eu_eng.indd 23
if necessary until you nd
or brie y and

Tuner Operations

Using auto install
When you access the 'RADIO' mode for
the rst time, you will be prompted to
install the radio stations. With this
feature, you can install all the available
radio station automatically with one
touch of button.
A
Press RADIO on the remote control
'AUTO INSTALL ... PRESS PLAY'
appears.
B
Press u until 'START... SEARCH'
appears on the display panel.
The system will start searching from
the FM band followed by the AM/MW
band.
All available radio stations with strong
signal will be stored.
Once complete, the rst tuned radio
station will be played back.
To stop the tuner installation, press
STOPÇ on the remote control.
Using automatic preset
Use automatic presetting to store or
reinstall all the preset radio stations.
A
Press RADIO to select 'FM' or 'AM/MW'
band.
B
Press and hold PROGRAM until
'START... SEARCH' appears on the
display panel.
All previously stored radio stations
will be replaced.
Once 40 radio stations presets have
been stored, searching will stop. The rst
tuned radio station will be played back.
23
2007/3/5 ¤U¤È 07:45:18