Getting Started; Prepare - Philips DTR7510/05 User Manual

3

Getting started

The basic steps to get you started are described
in this chapter.
3.1

Prepare

Prepare the remote control
Open the battery compartment.
Insert the two batteries supplied according
to the indications (+/-) inside the
compartment.
Close the battery compartment.
Note
Point the remote control directly at the remote
sensor on the front panel and select the desired
function.
Caution
Do not mix batteries or keep them in the remote
control for long periods of time without use.
Batteries must not be disposed of with your
household waste but to a local separate battery
collection system.
Do not dispose of batteries in a fire.
Getting started
Prepare the smart card
To be able to receive scrambled digital channels
from pay-TV providers, you need a smart card
(not supplied) from the provider broadcasting
those channels.
Warning
Insert the smart card with the chip facing down.
Notes
• You can access the information stored on
the smart card by selecting MENU, and
then the Menu/Settings/Smart Card
submenu.
• For more information about smart cards or
operators, consult your installer or dealer.
9