2
Set up
Adjusting the speakers
Press 2 on main unit to turn it on.
A
B
Press SURR to switch to multi-channel surround
mode.
C
Press PROG to access the system setup menu.
To adjust the audio delay for the
centre speaker:
Press .or > until 'CENTER DELAY' appears.
Press PROG.
Rotate the VOLUME control to change the delay
time.
To adjust the audio delay for the rear speaker:
Press .or > until 'REAR DELAY' appears.
Rotate the VOLUME control to change the delay
time.
D
To confirm all settings, press PROG.
See the accompanying user manual for other
options to fi ne-tune your speaker settings.
Need help?
User Manual
See the user manual that came with your Philips
Digital AV Receiver System
htr3465_98_qsg_eng.indd 1
htr3465_98_qsg_eng.indd 1
3
Enjoy
Start Playback
Press 2 on the main unit to turn it on.
A
Note Ensure all the audio/video devices are connected
before you start playback.
B
Turn on the connected audio/video device.
C
Press PLAY on the connected audio/video device.
D
Press DI/AUX to select the preferred audio input
source.
Playback from portable audio
player
Listen to audio from your portable audio player by
connecting the device to your main unit.
A
Connect the MP3 LINK cable (supplied) from the
MP3 LINK socket on the main unit to the
headphone output socket on your portable audio
player.
B
Press PLAY on your portable audio player.
C
Press MP3 LINK to listen to the playback.
See the accompanying user manual for radio
tuning and other playback settings.
.
2008 C Koninklijke Philips N.V.
All rights reserved.
www.philips.com
sgpjy_0814/98_4
Register your product and get support at
www.philips.com/welcome
Quick Start Guide
What's in the box?
Main Unit
1 centre, 2 front, 2 rear speakers
and subwoofer
HTR3465
1
Connect
2
Set up
3
Enjoy
Remote Control
and 2 batteries
MP3 LINK cable
Coaxial cable
for portable audio player
FM wire antenna
Power cable
Audio cable
User
Manual
2008-04-10 1:14:15 PM
2008-04-10 1:14:15 PM