Transportation, Storage And Disposal; Transportation; Storage; Disposal - HTC 800 RXP User Manual

8 Transportation, storage and disposal

8.1 Transportation

The machine cannot be moved manually if the drive
wheels are locked and the radio control activated. When
lifting the grinder use lifting straps. Attach the lifting
straps in the lifting eye, see figure 1. Only use lifting
straps approved for lifting equipment. Make sure that the
weights are locked in the forward position and that the
handle is in its back position, see figure 1.
Always make sure that the grinder is securely anchored
to its surroundings and the grinding head is lowered
against the surface. Make sure that the securing straps
or other equipment used for anchoring during transport
are tightened over non-moving parts, e.g. the grinder's
chassis.

8.2 Storage

The machine should be stored in a heated, dry area
when not in use. Otherwise, it may be damaged by
condensation and cold. If the machine is stored in a cold
o
area (below 0 C), it must be kept in a warm area (above
o
0 C) for at least two hours before use.
Always make sure that the grinder is securely anchored
to its surroundings and the grinding head is lowered
against the surface. Make sure that the securing straps
or other equipment used for anchoring during transport
are tightened over non-moving parts, e.g. the grinder's
chassis.
24 - Transportation, storage and disposal

8.3 Disposal

For recycling and scrapping of components, see the
applicable national regulations for each country. The
machine or machine components can also be returned
to HTC for recycling.
Material
Chassis Electro-galvan-
ised steel
Handle Plastic covered
steel
Cover Plastic, ABS
Wheels Metal, plastic and
rubber
Grinding head
Lower cover Aluminium
Cover Plastic, ABS
External plate Electro-galvan-
and steel compo- ised steel
nents
Other compo- Steel
nents
Electrical sys-
tem
Cables Copper conduc-
tors with Neo-
prene and PVC
coating
Motor Metal: Steel, alu-
minium and plas-
tic
Control cabinet Plastic
Electrical compo- Metal and plastic Electronic waste
nents
* Separate the different metal parts, if it is possible.
Waste manage-
ment
Metal recycling*
Metal recycling*
Plastic recycling/
Combustible
Metal recycling*
Metal recycling*
Plastic recycling/
Combustible
Metal recycling*
Waste cable
Electronic waste
Metal recycling*
888 - 001 -