To Use The Support Wheel; To Use The Weights - HTC 800 RXP User Manual

5.4 To use the support wheel

Use the support wheel to make it easy to move the
machine.
1. Fit the support wheel on the chassis.
2. Lock the support wheel with the pin.
3. Rotate the crank on the front of the support wheel to
adjust the height. Make sure that the machine tilts
and the grinding head hangs completely free of the
surface.
4. Release the drive locks of the wheels. See
the drive lock on the wheels on page 13 .

5.5 To use the weights

WARNING: Always make sure that the locking
pins lock properly when the weights are placed
in the desired position.
CAUTION: Fold up the weights during grinding.
Too high grinding pressure causes damage to
the machine and the floor.
The machine has two weights to make it easy to move
the machine's centre of gravity. Each weight has two
locking pins with which the weights can be adjusted and
locked in three positions; forward, up or backwards.
14 - Operation
• Position 1
Move the weights forward to apply a greater
pressure to the grinding discs which increases the
grinding effect.
• Position 2
Move the weights to its upright position for normal
grinding and transport.
To adjust
• Position 3
Move the weights backward when you prepare to
change the tools. Use the backward position when
you use tools with high removal rate (T-RexTM).
888 - 001 -