Table of Contents
Advertisement
5.4.1 Status display
During normal operation, the iSolar DL3 indicates the
status display with the following information:
• Data memory progress bar (fill level)
• Remaining logging time in days
• VBus
devices connected
®
• Sensors connected
The data memory progress bar is divided into 10 seg-
ments. Each segment represents 10 % of the memory
capacity.
Data memory progress bar
• Segment filled: The memory capacity of this seg-
ment is fully occupied.
• Segment flashing: The memory capacity of this seg-
ment is partly occupied.
The arrow above the data memory progress bar indi-
cates the remaining logging time in days.
In the bottom left-hand area of the status display, each
VBus
device connected with a functioning VBus
®
communication is indicated by a corresponding filled
checkbox.
In the bottom right-hand area of the status display,
each sensor connected is indicated by a correspond-
ing filled checkbox.
8
5.4.2 Network display
In the network display, information about the network
connection is displayed.
In the centre, the IP address of the DL3 is displayed.
When the DL3 is connected to the Local Area Net-
work (LAN), a house is indicated on the left-hand side
of the display.
When the DL3 is also connected to the Internet, a
globe is indicated on the right-hand side of the display
(the house is not indicated any more in that case).
If the DL3 has not been assigned with an IP address, none
of the symbols are indicated, the line remains empty.
Note:
If a static IP address has been assigned to
the DL3, the IP address and the house/globe
symbol appear as soon as the network cable
®
has been connected.
5.4.3 VBus
display
®
In the VBus
display, VBus
information about the
®
®
VBus
®
devices connected is indicated.
In the left-hand area of the display, the number of bytes
received (Rx) is indicated. In the right-hand area of the
display, the number of bytes transmitted (Tx) is indicated.
A VBus
device connected with a functioning VBus
®
communication is indicated by a corresponding filled
checkbox in the bottom area of the display.
Each VBus
device has its own display. The connec-
®
tions VBus
®
1 to VBus
®
6 are displayed each in their
own display.
Î In order to leave the status level and access the
VBus
displays, press button 2.
®
Î The display indicates information about the VBus
device.
Î In order to access information about further
VBus
®
devices, scroll down by pressing button 3.
5.4.4 Sensor display
In the sensor display, information about the sensors
connected is indicated.
In the left-hand area of the display, the resistance value
of the corresponding sensor is indicated. In the right-
hand area of the display, the temperature value of the
corresponding sensor is indicated in °C.
A sensor connected is indicated by a corresponding
filled checkbox in the bottom area of the display.
Each sensor has its own display. The data of the inputs
CL and S1 to S3 are displayed each in their own display.
Î In order to leave the status level and access the
sensor displays, press button 2.
Î Press button 2 to scroll down through the VBus
displays until the sensor displays appear.
®
Î In order to access information about further sen-
sors, scroll down by pressing button 2.
®
®
Advertisement
Table of Contents
