Table of Contents
Advertisement
Menu structure
Adjustment channel
Adjustment range / selection
Language
English, Deutsch, Français
Time
-Date
01.01.2001 ... 31.01.2050
-Time
00:00 ... 23:59
VBus
-VBus 1 ... VBus 6
Yes, No
-Sensors
--S1 ... S3
--Type
None, Pt1000, Pt500, KTY, Impulse
--Offset
-15.0 ... +15.0 K
--Vol./Imp.
0.1 ... 100.0 l/Imp
-Current loop
None, 0-20 mA, 4-20 mA,
--Type
Si-420TC
Logging
-Interval
00:01 ... 20:00 (mm:ss)
-Log. type
linear, cyclic
Network
-VBus.net
Yes, No
-LAN
--Auto configuration
Yes, No
--Address
--Mask
--Recover IP
Yes, No
--Interval
00:10 ... 24:00
--Recover Now
Erase
-Erase data
Yes, No
-Reset
Yes, No
Version
12
Factory setting
No
None
0.0 K
1.0 l/Imp
cyclic
No
Yes
No
No
No
5.8
SD memory card slot
SD memory card slot
The SD memory card slot is located at the front of
the device. By means of the SD memory card slot,
logged data can be transferred onto an SD card.
The memory of an SD card in the slot is used
for data transfer only. It will not enlarge the
memory of the iSolar DL3.
5.9
Power supply connection
Power supply is carried out via an external mains
adapter. The connection terminals are located inside
the housing of the iSolar DL3.
5.10
VBus
connection
®
The iSolar DL3 is connected to one or several con-
trollers via VBus
cables. The connection terminals are
®
located inside the housing of the iSolar DL3.
Advertisement
Table of Contents
