AEG L61270BI User Manual page 15

You can modify or cancel the delay time
at any moment, before pressing button
Inicio/Pausa.
The door will be locked throughout the
delay time. If you wish to add laundry in
the appliance during the delay time,
press the button Inicio/Pausa to set the
appliance to pause. When the indicator
Puerta/Porta goes off , the door can be
opened. Add the laundry, close the door
and press button Inicio/Pausa again.
Cancelling the delayed start
• Press button Inicio/Pausa to set the
appliance to PAUSE;
• Press button Inicio Diferido until the
symbol ' is displayed;
• Press button Inicio/Pausa again to
start the programme.
The set delay can be
changed only after you have
set the washing programme
again.
The Delay Start cannot be set with Drain
programme.
10.5 Altering an option or a
running programme
It is possible to change some options
before the programme carries it out.
Before you make any change, you must
press button Inicio/Pausa to pause the
appliance.
Changing a running programme is
possible only by resetting it.
Turn the programme dial to Off and then
to the new programme position.
Press Inicio/Pausa button again to start
the new programme. The washing water
in the tub will not emptied out.
10.6 Interrupting a
programme
Press button Inicio/Pausa to interrupt a
programme which is running, the
corresponding indicator starts blinking.
Press button Inicio/Pausa again to restart
the programme.
10.7 Cancelling a running
programme
Turn the selector dial to Off to cancel a
programme which is running. Now you
can select a new programme.
Before starting the new
programme the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment, if
not fill the detergent again.
10.8 Opening the door
When the appliance is working and
through the delay time, the door is
locked.
If, for any reason, it is necessary to open
it, firstly press button Inicio/Pausa to set
the machine to pause.
If the indicator Aclarado/Enxag. Extra
after a few minutes goes off, the door
can be opened.
If the indicator Aclarado/Enxag. Extra
stays on and the door remains locked,
this means that the appliance is already
heating or that the water level is too
high. In this case the door cannot be
opened.
If you cannot open the door but you
need to open it, turn the programme dial
to Off to switch the appliance off. After a
few minutes the door can be opened
(pay attention to the water level and
temperature !) .
After closing the door, it is necessary to
set the programme and the options
again. Press button Inicio/Pausa to start
the programme again.
10.9 At the end of the
programme
The appliance stops automatically. The
indicator of button Inicio/Pausa and the
phase indicator Lava. go off. A blinking
will appear on the display.
If you have set a programme or an
option that ends with water in the tub,
the indicator Puerta/Porta remains on.
ENGLISH 15