Advertisement

L6FLI48S
USER
MANUAL
EN
User Manual
Washing Machine

Advertisement

Table of Contents
loading

Summary of Contents for AEG L6FLI48S

  • Page 1 L6FLI48S User Manual Washing Machine USER MANUAL...
  • Page 2: Table Of Contents

    18. ENVIRONMENTAL CONCERNS..............38 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
  • Page 4: Safety Instructions

    This appliance is intended to be used in household • and similar applications such as: staff kitchen areas in shops, offices and other – working environments; by clients in hotels, motels, bed & breakfast and – other residential type environments;...
  • Page 5 ENGLISH future they must be reattached to lock be replaced, this must be carried out the drum to prevent an internal by our Authorised Service Centre. damage. • Connect the mains plug to the mains • Always take care when moving the socket only at the end of the appliance as it is heavy.
  • Page 6: Product Description

    • Do not wash fabrics which are heavily hinge and seals, other seals, door soiled with oil, grease or other greasy locking assembly, plastic peripherals substances. It can damage rubber such as detergent dispensers. Please parts of the washing machine.
  • Page 7: Technical Data

    ENGLISH 3.2 Appliance overview 11 12 Worktop Drain hose Detergent dispenser Inlet hose connection Control panel Mains cable Door handle Transit bolts Rating plate Hose support Drain pump filter Feet for levelling the appliance The rating plate reports the model name (A), product number (B), electrical ratings (C) and serial number (D).
  • Page 8: Installation

    Level of protection against ingress of solid particles and IPX4 moisture ensured by the protective cover, except where the low voltage equipment has no protection against mois‐ ture Water supply pressure Minimum 0.5 bar (0.05 MPa) Maximum 8 bar (0.8 MPa)
  • Page 9 ENGLISH 4. Remove the three bolts by using the key supplied with the appliance. Pull out the plastic spacers. We recommend that you keep the packaging and The appliance must be level and stable. the transit bolts for any transport of the appliance. A correct adjustment of the appliance level prevents the 5.
  • Page 10 You can extend the drain hose to maximum 400 cm. Contact the authorized 45º 45º service centre for the other 20º 20º drain hose and the extension. It is possible to connect the drain hose in different ways: 1. Make a U shape with the drain hose and put it around the plastic hose guide.
  • Page 11 ENGLISH 6. Position the hose directly to a built- in drain pipe in the room wall and tighten it with a clamp. 5.5 Electrical connection The end of the drain hose must always be ventilated , At the end of installation you can connect i.e.
  • Page 12: Accessories

    If you install the appliance on a plinth WARNING! that is not an accessory supplied by Do not put the tumble dryer AEG, secure the appliance in the fixing under the washing machine. plates. Verify the compatible stacking kit by checking the Read carefully the instructions supplied depth of your appliances.
  • Page 13: Dial And Buttons

    ENGLISH Programme dial • Only Rinse option Display Spin reduction options touch button Delay Start touch button • No-Spin option Time Save touch button • Rinse Hold option Start/Pause touch button Temp touch button Option touch button On/Off push button •...
  • Page 14 As the Stand-by function automatically • If you touch the Start/Pause button, deactivates the appliance to decrease the appliance performs the spinning the energy consumption in a few cases, phase and drains the water. you may need to activate the appliance The appliance empties the again.
  • Page 15: Programmes

    ENGLISH The appliance performs only the Use this option for items with normal or rinsing phase, the spinning and the light soil or items to refresh. draining phases of the selected Touch this button once to decrease the programme. duration. The relevant indicator comes on.
  • Page 16 Programme Programme description Mixed fabric (cotton and synthetic items) Cotton 20° Synthetic items requiring a gentle wash. Normally and light‐ Easy Iron ly soiled items. White cotton items. This high-performance wash program combined with steam vapour, removes more than 99,99% of...
  • Page 17 ENGLISH Programme Default temper‐ Reference spin Maximum load ature speed Temperature Spin speed range range 40 °C 1200 rpm 1,5 kg Wool/Silk 40 °C - 1200 rpm - 800 rpm (Cold ) 30 °C 1200 rpm 3 kg 20min 3kg 40 °C - 30 °C 1200 rpm - 800 rpm 1400 rpm...
  • Page 18 Options ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...
  • Page 19: Settings

    ENGLISH Universal Liquid Uni‐ Liquid for Delicates Programme Special versal coloureds woollens powder ▲ ▲ ▲ Anti-Allergy 1) At temperature higher than 60 °C the use of powder detergent is recommended. ▲ = Recommended -- = Not recommended 9.2 Woolmark Apparel Care - Blue The wool wash cycle of this machine has been approved by The Woolmark Company for the washing of wool garments labelled as...
  • Page 20: Before First Use

    11. BEFORE FIRST USE 1. Make sure that all transit bolts have 4. Set and start a programme for cotton been removed from the appliance. at the highest temperature without 2. Make sure that the electrical power is any laundry in the drum.
  • Page 21 ENGLISH Flap for powder or liquid detergent. Always follow the instructions that you find on the packaging of the detergent products, but we recommend that you do not exceed the maximum indicated level ( ). This quantity will however guarantee the best washing 4.
  • Page 22 Cancelling the delay start after the countdown has started To cancel the delay start: 1. Touch the Start/Pause button to pause the appliance. The related indicator flashes. 2. Touch the Delay Start button repeatedly until the display shows 3. Touch the Start/Pause...
  • Page 23 ENGLISH 2. At the end of the load detection, the 3. Touch the Start/Pause button indicator goes off and the time again. The washing programme continues. dots stop flashing. The programme duration will be adjusted accordingly 12.10 Cancelling a running and could increase or decrease.
  • Page 24 4. Keep the door and the detergent dispenser slightly ajar to prevent mildew and odours. 5. Close the water tap. 12.13 Draining water out after end of cycle If you have chosen a programme or an option that does not empty out the water...
  • Page 25: Hints And Tips

    ENGLISH If you set a programme or an option that ends with water in the drum, the Stand-by function doesn't deactivate the appliance to remind you to drain the water. 13. HINTS AND TIPS WARNING! Refer to Safety chapters. 13.1 The laundry load •...
  • Page 26: Care And Cleaning

    • Normally soiled laundry may be bleach for whites and laundry washed without prewash in order to sanitization, save detergent, water and time (the – liquid detergents, preferably for environment is protected too!). low temperature wash •...
  • Page 27 ENGLISH circulation and dry the humidity inside CAUTION! the appliance: this will prevent mildew Do not use alcohol, solvents and odours. or chemical products. If the appliance is not used for a long time: close the water tap and unplug the CAUTION! appliance.
  • Page 28 Clean it when needed, using ammonia cream cleanser agent without scratching the seal surface. 2. Remove the top part of the additive Always obey the instructions compartment to aid cleaning and that you find on the flush it out under running warm packaging of the product.
  • Page 29 ENGLISH 14.9 Cleaning the drain pump Regularly check the drain pump filter and make sure that it is clean. Clean the drain pump if: • The appliance does not drain the water. • The drum does not turn. • The appliance makes an unusual noise because of the blockage of the drain pump. •...
  • Page 30 180˚ WARNING! Make sure that the impeller of the pump can rotate. If it does not rotate, contact the Authorised Service Centre. Make sure also that you tighten the filter correctly to prevent leakages. 14.10 Cleaning the inlet hose...
  • Page 31: Troubleshooting

    ENGLISH 14.11 Emergency drain 2. Remove the inlet hose from the appliance by loosening the ring nut. If the appliance cannot drain the water, carry out the same procedure, described in 'Cleaning the drain pump' paragraph. If necessary, clean the pump. 14.12 Frost precautions If the appliance is installed in an area where the temperature can reach the...
  • Page 32 15.1 Alarm Codes and Possible failures The appliance does not start or it stops during operation. First try to find a solution to the problem (refer to the tables). WARNING! Deactivate the appliance before carrying out any check. With some problems, the display shows an alarm code and the...
  • Page 33 ENGLISH If the display shows other alarm codes, deactivate and activate the appliance. If the problem continues, contact the Authorised Service Centre. In case of different problem with the washing machine check the table below for possible solutions. Problem Possible solution •...
  • Page 34: Consumption Values

    Problem Possible solution The programme dura‐ • The ProSense System is able to adjust the programme dura‐ tion increases or de‐ tion according to the type and the laundry load size. Refer to creases during pro‐ "The ProSense System load detection" in "Daily Use" chapter.
  • Page 35 ENGLISH 16.2 Legend Laundry load. h:mm Programme duration. Energy consumption. °C Temperature in the laundry. Litres Water consumption. Spin speed. Remaining moisture at the end of spinning phase. The higher is the spin speed, the higher is the noise and the lower is the remaining moisture. Values and programme duration may differ depending on different conditions (e.g.
  • Page 36: Quick Guide

    Programme Litres h:mm °C Cottons 1.75 3:50 1400 60°C Cotton 20° 0.30 2:50 1400 20°C Synthetics 0.60 2:15 1200 40°C Delicates 0.40 1:15 1200 30°C Wool/Silk 0.30 1:05 1200 30°C 1) Reference indicator of the spin speed. 2) Suitable for washing heavily soiled textiles.
  • Page 37 ENGLISH 17.2 Cleaning the drain pump filter 180˚ Clean the filter regularly and, especially, if the alarm code appears on the display. 17.3 Programmes Programmes Load Product description White and coloured cottons. Normally soiled Eco 40-60 8 kg garments. 8 kg White cotton and coloured cotton.
  • Page 38: Environmental Concerns

    18. ENVIRONMENTAL CONCERNS appliances marked with the symbol Recycle materials with the symbol with the household waste. Return the Put the packaging in relevant containers product to your local recycling facility or to recycle it. Help protect the contact your municipal office.
  • Page 40 www.aeg.com/shop...

Table of Contents