Daily Use - AEG L61270BI User Manual

14 www.aeg.com

10. DAILY USE

10.1 Filling the detergent and
additives
Compartment for prewash phase,
soak programme or stain remover.
Compartment for washing phase.
Compartment for liquid additives
(fabric conditioner, starch).
Maximum level for quantity of liquid
additives.
Always obey the instructions
that you find on the
packaging of the detergent
products.
10.2 Setting a programme
Turn the programme selector dial to the
required programme.
The programme dial determines the type
of washing cycle (e.g. water level, drum
movement, number of rinses) and the
washing temperature according to the
type of laundry.
The indicator of Inicio/Pausa button
starts blinking.
The programme dial can be turned
either clockwise or anticlockwise.
Off = Reset programme/switching OFF
of the appliance
If you turn the programme
dial to another programme
when the appliance is
working, the yellow indicator
of button Inicio/Pausa blinks
3 times. The display shows
the message Err to indicate
a wrong selection. The
appliance does not perform
the new set programme.
10.3 Starting the programme
Press button Inicio/Pausa to start the
programme. The corresponding red
indicator stops blinking.
The indicator Lava. is on to indicate that
the appliance starts operating.
The indicator Puerta/Porta is on to
indicate the door is locked.
If you have chosen a delayed start with
button Inicio Diferido, the appliance will
begin the countdown.
If you set an incorrect option, the yellow
indicator of button Inicio/Pausa blinks for
3 times. The display shows the message
Err for some seconds.
10.4 Starting a programme
with the delay start
Set the delay start before starting the
programme.
• After having set all the required
options, press button Inicio Diferido
repeatedly to set the required delay.
The wash programme can be delayed
from 30 min. - 60 min. - 90 min., 2
hours and then by 1 hour up to a
maximum of 20 hours.
The symbol appears on the
display.
• Press button Inicio/Pausa.
The appliance starts its countdown.
The programme starts after the
selected delay has expired.
The set delay time value appears on
the display for about 3 seconds, then
the duration of the programme
appears again.