Table of Contents
Advertisement
[OSD Language]
Selects the default on-screen menu language.
[Screen Saver]
Turns off or on the screen saver mode. Helps
to protect the TV screen from being damaged
due to over exposure to a static image for too
long.
•
[On] – Sets the screen saver to appear
after 15 minutes of inactivity (for
example, in pause or stop mode).
•
[Off] – Disables screen saver mode.
[Sleep Timer]
Switches to standby automatically after the
preset time.
•
[15 mins] , [30 mins] , [45 mins] , [60 mins]
– Selects the count down time before
the Home Theater System switches to
standby.
•
[Off] – Disables sleep timer mode.
[DivX(R) VOD Code]
Displays the DivX® registration code.
Tip
•
Enter this Home Theater System DivX
registration code when you rent or purchase
video from www.divx.com/vod. The DivX
videos rented or purchased through the
DivX® VOD (Video On Demand) service
can be played only on the device to which it is
registered.
Audio setup
Audio Setup
Speakers Volume
Speakers Delay
Night Mode
CD Upsampling
1
Press
SETUP .
» [General Setup] menu is displayed.
2
Press
to select [Audio Setup] , then
press .
3
Select an option, then press OK .
4
Select a setting, then press OK .
•
To return to the previous menu,
BACK .
press
•
To exit the menu, press
Note
•
See the explanations of the above options in
the following pages.
[Speakers Volume]
Sets the volume level of each speaker to get
the ideal audio balance.
1) To start, press OK .
2) Select a speaker in the menu, then press
to adjust the volume level.
3) Press OK to confi rm and exit.
Note
•
The test tone is emitted from the speaker
which you adjust.
SETUP .
EN
29
Advertisement
Table of Contents
