[Speakers Delay]
Sets the delay time for the center and rear
speakers if they are placed closer to the
listening position, so that the sound output
from all speakers reach the listening position
at the same time.
1) To start, press OK .
2) Select a speaker in the menu, then press
to set the delay time.
3) Press OK to confi rm and exit.
Note
•
Allow 1ms setting for every 1 foot distance
between the speaker and the listening position.
[Night Mode]
Makes loud sound level softer and soft sound
level louder so that you can watch the DVD
movies at a low volume, without disturbing
others.
•
[On] – Enjoys quiet viewing at night.
[Off] – Enjoys surround sound with a full
•
dynamic range.
Note
•
Applicable only to Dolby Digital encoded discs.
30
EN
Video setup
Video Setup
TV System
TV Display
Picture Setting
Progressive
1
SETUP .
Press
» [General Setup] menu is displayed.
2
to select [Video Setup] , then
Press
press .
3
Select an option, then press OK
4
Select a setting, then press OK .
•
To return to the previous menu,
BACK .
press
•
To exit the menu, press
Note
•
See the explanations of the above options in
the following pages.
[TV System]
Change this setting if the video does not
appear correctly. By default, this setting
matches the most common setting for TVs in
your country.
[PAL] – For PAL-system TV.
•
•
[NTSC] – For NTSC-system TV.
[Multi] – For TV that is compatible with
•
both PAL and NTSC.
SETUP .